This service involves us fitting H beam 156mm forged con rods and ND spec 85mm "drop in" "long rod" JE pistons amongst other things to your engine. Perfect for people who have a good condition running stock motor and want to increase power beyond the stock rod power capability and don't need a full rebuild as such.
This job is done with the engine in the car and INCLUDES labour to do so, it is a DRIVE IN/DRIVE OUT process. The engine is then rated to a peak figure of 600Hp strength wise. If you want to go above that then we advise upgrading to an I beam rod, select extra cost from drop down box.
The process is you "drive your car in" (So long as the engine is in good running order already) we then strip, measure, hone and fit the below parts, run in the engine and fill with Titan Race Pro R 15w/50 synthetic oil. Afterwhich you "drive it out" again.
Parts we fit as part of this deal are as below;
ND spec JE forged piston set 85mm bore
Manley H beam 156mm steel forged con rods
ND uprated metal head gasket
ND H11 head stud kit
New cambelt and balance belt
Running in oil and filter
Titan race 15/50 fully synthetic oil and oil filter
Full run in procedure completed prior to pick up also
We need the car for approx 1 working week but some vehicles may be needed for 2 working weeks, dependant on our workload at the time and if other work is requested or not.