225mm organic clutch to suit an Evo 4,5 & 6...........

240mm organic clutch to suit an Evo 7,8 & 9...........

High quality yet affordable metal head gasket.......

10 Bar pressure sensor......

Std USED Mitsubishi 100mm stroke crank........

12 tooth crank splitter (or 12- 1 by removing one tooth)..... (Evo 3-9)

(Fits 5 Speed Transmission Only) "taller" crown wheel and pinion to extend gearing......

550cc Injectors.....

This kit uses four pot AP callipers and brackets.........

Superb 6 pot front brake kit from AP Racing..........

Larger disc version AP racing brake kit..........

Larger disc version AP racing brake kit..........

APS dump valve kit.....

ARP head stud kit......

ARP 8740 main stud kit......

Main stud kit for your Evo........

This is the cheapest of the Blitz air filter range.........

Entry level air filter kit for the Evo X

Stainless steel Nur Spec R half exhaust system.......

Stainless steel Nur Spec R half exhaust system.......

Stainless steel Nur Spec R half exhaust system.......

Stainless steel Nur Spec R half exhaust system.......

80mm bore Blitz downpipe....

70mm bore Blitz downpipe.....

This is the best known Blitz filter.......

This is the best known Blitz filter........

Black chrome finish dump valve.....

Offered at a sensible price as we buy them in volume.......

Bullet Billet block 4G63 or 4G64......

Cambelt Kit (4G63 or 4G64)......

Castrol SRF brake fluid.......

Best racing fluid on the market....

Cobb Accessport......

Reduces Body Roll. Increases Handling Ability

Reduces Body Roll. Increases Handling Ability

E789 Headlight air duct.......

Eibach +15mm wheel spacer set......

Eibach Lowering Spring Set......

We supply a four spring kit which is excellent quality and is one of the best available.....

Replacement RS Crown Wheel and Pinion..... 3512A055

Forged 2.0 LR engine job for your Evo, INCLUDES LABOUR......

Twin plate kit that includes bespoke flywheel.........

Drives very well.....

This unit requires a donor engine to be exchanged/supplied.....

This unit requires a donor engine to be exchanged/supplied.......

Fast Road Engine 1468cc Version One......

DS2500 Compound Pad For Standard Front Brembo Calliper........

DS2500 Compound Pad For Standard Rear Brembo Calliper........

Harmonic fluid filled crank pulley.....

Coming soon......

Uprated head gasket for your Focus RS Mk3.....

Gates Racing Cambelt.....

HEL Braided brake lines......

Stainless steel 4 hose kit from HEL..........

Excellent quality product from HKS......

HKS Iridium Spark Plug Range......

Uprated Iridium spark plug for your Evo........

The HKS Racing Suction Kit......

SST Type transmission fitment only.............

5 Speed manual gearbox models only........

Sequential blow off valve from HKS.....

Service part when you have an HKS induction kit fitted.....

The HKS Super Power Flow Intake systems have been designed to significantly.......

Coming soon......

1050cc Injectors.....

This product converts your standard H pattern gearshift into a sequential movement........

Reduces engine movement in low gears and when launching.....

Injector Dynamics 1050cc Injectors x4 (Evo 4-9).....

Injector Dynamics 1050cc Port Injectors x4 (Focus)......

Injector Dynamics 1340cc Injectors x4 (Evo 4-9)......

Injector Dynamics 1340cc Port Injectors x4 (Focus).....

The uprated injectors fit in the standard position using existing wiring.....

Injector Dynamics 1725cc Port Injectors x4 (Focus)......

Injector Dynamics 2000cc Injectors x4 (Evo 4-9)......

ND spec JE piston kit......

ND Spec JE piston kit........

ND offer many different types of forged pistons specially designed for your EVO.....

ND spec JE piston kit.....

Large K&N Filter and Bespoke Air box Lid......

Larger DBW throttle......

This is one of our latest turbo kits with THE NEW HK40 cast Collector manifold, made for Evolution models 4-9..... Makes up to 600Hp on Super Unleaded

This is one of our latest turbo kits with the NEW HK40 cast collector manifold, made for Evolution models 4-9.............Makes up to 700Hp on Super unleaded!

This is one of our latest turbo kits with the NEW HK40 cast manifold, made for Evolution models 4-9.....Makes up to 625Hp on Super Unleaded

This is one of our latest turbo kits, with the NEW HK40 cast collector manifold, made for Evolution models 4-9.........Makes up to 840Hp on Super Unleaded

This is one of our latest turbo kits, with the NEW HK40 cast collector manifold, made for Evolution models 4-9......Makes up to 800Hp on Super Unleaded

This is one of our latest turbo kits with the NEW HK40 cast collector manifold, made for Evolution models.....Makes up to 820Hp on Super Unleaded

Link G4X Plug in ecu - Evo 4-8 (4 Plug).....

Link G4X Plug in ecu - Evo 8-9 (3 Plug)....

Link G4X wire in ecu and adaptor harness......

Link Thunder ecu system......

Magnus Billet Fuel Rail.....

Magnus Billet Fuel Regulator.....

Magnus Clutch Launch Device.........

One of the best Inlet Manifolds Available for your Evo 4-9........

Manley Forged piston kit......

Manley H beam con rods......

Low cost forged steel conrods.....

Manley I beam con rods......

Super strong I beam rod........

Fully mappable ACD controller......

Latest generation diff controller for the Evo x.........

MID Engine Block (Core block required)......

MID Engine liner set only (NOT fitted)......

This Motec C125 Dash is cutting edge technology......

M800 OEM plug and play ecu......

M800 OEM plug and play ecu......

M800 OEM plug and play ecu......

Superb new product from Motec.......

ND 1.3mm head gasket for all 4G63 builds..........

ND 1.4/1.5Bar Actuator......

ND custom 4340 steel crankshaft.......

ND 1500Hp head gasket solution......

Superb quality valves........

Custom ND High VE Design Drop in Forged PIston Kit!!!

ND Short Engine Version 2.....(Exchange Required)

ND Short Engine Version 1..... (Exchange Required)

For 2.24L Long Rod 4G64 based stroker please click option box.......

ND Short Engine Version 5.....(Exchange Required)

ND Short Engine Version 4.....(Exchange Required)

ND Short Engine Version 6.....(Exchange Required)

ND Short Engine Version 3.....(Exchange Required)

For 2.37L Long Rod 4G64 based stroker please click option box.....

Superb quality valves.....

Superb quality valves.....

In stock......

ND 3" Full Exhaust SS System......

ND 3" Half Exhaust SS System......

Coming soon......

ND 4 bar map sensor......

Motorsport level high accuracy 5 bar map sensor.......

ND 5.5R turbo kit......

ND Intercooler kit......

ND 600Hp Intercooler (WITH Pipework)......

ND specially sourced 87mm bore head gasket.......

ND custom 4340 steel crankshaft.......

ND 925Hp V2 Intercooler (WITH Pipework)

ND custom 4340 steel crankshaft.......

ND Adjustable camshaft pulley to allow exact cam timing.........

ND Aero front bumper........

ND Air temp sensor kit..........

ND ARP head stud kit (10mm)......

ND ARP main stud kit.....

ND big wing high capacity baffled sump pan (Exchange)........

This unit requires a donor engine to be exchanged/supplied.......

ND Block Deck Brace (No Machnining Required)......

Set of 16 Bronze guides for your 4G63 head.......

Individual replacement coil for our CDi system........

Full ND CDi system for your Evo........

CDi Coil mounting plate.....

ND curl funnel inlet manifold (Suits larger DBW throttle only).......

Custom 76mm (3") exhaust system built on your car.....

Custom 89mm (3.5") exhaust system built on your car.....

Custom 89mm (3.5") Ti exhaust system built on your car.....

ND CUSTOM DESIGN JE Forged piston kit.....

Coming soon......

ND T4 twin scroll exhaust manifold.....

Pair of ND custom grind solid profile camshafts......

ND double valve spring kit (MANY parts included NOT just springs).......

ND Drive By Wire E Throttle upgrade.....

ND drop in forged piston kit......

ND drop in forged pistons......

Set of four uprated engine liners....

ND Evo 4-6 Special Dry Sump Special Tank (Offside Inner Wing) NEW!........

In Car ND dry sump tank......

ND Evo 580 turbo kit.....

NEW "Special" ND dry sump tank......

ND V band exhaust manifold.....Normally produced to order in only 2-3 days!

ND Exedy Twin plate clutch kit complete......

ND fire ring head gasket (Machining type).....

ND fire ring head gasket (Non machining type).....

ND Fire ring head gasket solution NO MACHINING REQUIRED!.....

Drop in forged job for your Focus RS......

ND forged steel con Rods.......

ND G25-550 turbo kit

Non ticking replacement lifters.......

As used on our Evo demo cars.....

As used on our Evo demo cars.....

These head studs retain the original 11mm thread size in the block so fits straight in. The L19 material has excellent tensile strength and can hold the head don at power levels on or around 800Hp.

We advise fitment of these studs on anything over 450Hp as the normal black ARP stud is simply not up to the long term job!

For VERY high hp levels you should se the ND 12.7mm L19 stud and fire ring head gasket solution.

ND L19 larger head stud kit (11mm)......

ND large diameter head stud kit H11/L19......

Uprated oil cooler kit.....

ND Pair Uprated camshafts (Exchange).....

ND port injector inlet manifold......

ND ported cylinder head (Exchange)......

Another innovative ND product.....

ND Push clutch conversion kit....

ND Quad plate clutch kit.........

This unit requires a donor engine to be exchanged/supplied........

This unit requires a donor engine to be exchanged/supplied.....